Page 1 of 1

RME Fireface UCX (16 Inputs simultaneously)

Posted: January 24th, 3:10 pm
by pwnified
A nice little interface which packs a lot of features, including 8 inputs simultaneously on the iPad! Has USB 2.0 class compliant drivers and works flawlessly. Extremely high audio quality from RME.

Here's a video that features MultiTrack DAW at the 2012 NAMM show.
http://www.youtube.com/watch?v=YTNQAJu6 ... re=related

Product link:
http://www.rme-audio.de/en_products_fireface_ucx.php
products_fireface_ucx_2b copy.jpg
products_fireface_ucx_2b copy.jpg (67.39 KiB) Viewed 37155 times
products_fireface_ucx_3b copy.jpg
products_fireface_ucx_3b copy.jpg (67.63 KiB) Viewed 37155 times

Re: RME Fireface UCX (16 Inputs simultaneously)

Posted: January 24th, 9:54 pm
by Thatbastarddon
Tempting :D

Re: RME Fireface UCX (16 Inputs simultaneously)

Posted: January 25th, 1:05 am
by Erik dP
I saw a NAMM video (w. MT) a few days ago, which showed when they did a "class compliant" mode change to make it work for Ipad. I.e. they made it to also work for Ipad. However, I think I saw somewhere it would cost $1000 which is a bit too much unless the buyer also runs a studio.

The new small black Tascam IU2 interface (2 in + midi) looked nice though at $149 with included Idock-cable. Also works with computers. http://tascam.com/product/iu2/

Behringer also have a Alesis IO-dock clone. But what if the user prefers to turn the view 90 degrees? Might not cost too much maybe.

Re: RME Fireface UCX (16 Inputs simultaneously)

Posted: January 29th, 11:45 am
by Snapsting
This new sound card apparently has ADAT input, useful if like me youve got a 8 channel mic preamp. does anyone have any knowledge on whether inputs to the fireface thru ADAT will be seen by the iPad and MultiTrack?

Thanks

Re: RME Fireface UCX (16 Inputs simultaneously)

Posted: April 7th, 10:20 pm
by pwnified
Unfortunately not, however I have heard that this will be possible with a firmware upgrade. You will be able to create templates which are mappings of various hardware inputs to the Class Compliant topology setup.

Re: RME Fireface UCX (16 Inputs simultaneously)

Posted: April 13th, 10:38 am
by walleye
i have an ipad and
the RME fireface

as well as multitrackDAW

they work well and the mic pre's are quality

when MultitrackDAW can record 24 bit audio then i am totally there

Re: RME Fireface UCX (16 Inputs simultaneously)

Posted: February 24th, 5:45 am
by Dtecter5
Helle their!
But how do you connect your Firleface to the ipad??!
I am more than highly inerested!
Is that possible?
Thanks for reply
D