Track input setting

How to use MultiTrack DAW
Post Reply
flyinbryan
Posts: 3
Joined: January 26th, 7:39 pm

Track input setting

Post by flyinbryan »

Just bought this app, and after searching high and low, I cannot find a way to set a track input to an ios-compatible interface (Tascam iXR). Everything is plugged in correctly, properly powered and ready to go.
The only options that come up in the track settings are microphone, and two interapp sources.
Any pointers?
Also, if someone could tell me how to create a stereo track, I'd appreciate it. Could not find in Help.
Sorry for noob questions but drawing a total blank.
User avatar
pwnified
Posts: 1565
Joined: August 17th, 9:41 pm

Re: Track input setting

Post by pwnified »

Hi flyinbryan,
If the interface is detected properly you should see a popup when opening a song or when plugging in the hardware, which says the name of the hardware, and the 'IN' fader (lower left) should change to represent the number of input channels (up to 4 or 8, depending on iphone/ipad.)

It sounds like the interface is not being detected properly by iOS.
Image
flyinbryan
Posts: 3
Joined: January 26th, 7:39 pm

Re: Track input setting

Post by flyinbryan »

Thank you.

It worked with Garageband, but who wants to do that? ;)
EDIT - but only for a moment. It may be a USB power issue - the official Tascam USB power cord is on order. If results change, I'll report back. Thanks again.
Post Reply