Input options and microphones
Posted: October 1st, 12:41 pm
iPad USB:
The iPad (1, 2, and 3) can use the Camera Connection Kit to connect USB devices. The iPad 4 should use the Lightning to USB Camera Adapter. Any USB audio device which is full-speed USB class-compliant should work, but if the device draws too much current a powered USB hub is required. We have tested the following devices:
Focusrite Scarlett 2i2 (Works with 2 inputs simultaneously)
Focusrite Scarlett 8i6 (Works with 6 inputs simultaneously)
Focusrite Scarlett 18i6 (Works with 8 inputs simultaneously)
Lexicon Omega (Works with 4 inputs simultaneously) Forum thread on this unit
Alesis iO Mix (4 inputs simultaneously) (not shipping yet)
Alesis iO Dock (2 inputs simultaneously)
Alesis iO4 Four-Channel interface (Works with 4 inputs simultaneously)
RME Babyface (8 Inputs simultaneously)
RME Fireface UCX (8 Inputs simultaneously) Forum thread on this unit
M-Audio Mobilepre (2 inputs simultaneously)
M-Audio Fast Track Pro (2 inputs simultaneously)
Blue Yeti (Stereo Microphone)
Griffin iMic USB Audio Interface (2 inputs simultaneously)
Art USB Dual Pre Project Series (2 inputs simultaneously)
Others have reported USB devices that work:
MXL USB Mic Mate Pro
C01U - USB Studio Condenser Microphone
Samson Zoom H4n
Samson Zoom H4
Allen & Heath ZED-10FX
Roland UA-1G USB Audio Interface
Roland UA-25 USB Audio Interface (requires powered USB hub)
Shure X2u XLR-USB Signal Adapter (requires powered USB hub)
Behringer UCA-222
USB Things tried that didn't work:
Tascam US-800 (8 inputs simultaneously, issues with iOS 6.0.1) Forum thread on this unit
M-Audio Fast Track Ultra
Akai EIE Pro
Mixvibes U-Mix 44
iPhone 4, iPod 4th Gen, iPad, and iPad 2:
Stereo interfaces and mics:
Sonoma GuitarJack 2
Tascam iM2
Fostex AR-4i (iPhone only)
Line 6 Mobile In
Mono only guitar interfaces:
Apogee JAM (not for iPod)
iRiffPort
iPod 3rd Gen, iPhone 3G, and earlier:
These products use the headset input port and will work with all Apple devices. The problem with the headset input is that it is mono only, and also suffers from a major bass rolloff (150Hz and below). There is also crosstalk from output to input, so when monitoring tracks the mic tends to pick up the signal as bleed into the recording.
iRig Mic Sounds a little thin for vocals, and crosstalk is a major issue (especially a high transient sound like a click track)
Amplitube iRig (Guitar) Can be used for recording guitar, but recommended to use a extra headphone amplifier to reduce crosstalk (It has a lot)
Peavey Ampkit Link (Guitar) Great for recording guitar. Has active circuitry to reduce crosstalk so it takes a couple AAA batteries.
kVconnection XLR microphone adapter cable This one is good for connecting a non-phantom powered mic which has an XLR plug. We tested this adapter with a Shure SM57 dynamic mic and a Audio Technica AT801 mic and it works, but with the same crosstalk problems and lowend cut that the headset input port exhibits. Cost is $23.50. Please see the companies web site for a variety of connectors.
Doc connector mics for 3G, 3GS, iPod 2nd and 3rd gen:
A much better alternative than the above headset port interfaces, is to use a Doc connector mic/interface. This connector has a stereo line input/output without any EQ or other nastyness. These are analog inputs/outputs. For these older models (3GS and earlier, iPod 3rd Gen and earlier) a number of them are available and the prices are quite cheap now:
Blue Mikey ver. 1 This mic sounds very good when recording low volume sources, and has great bass response.
Blue Mikey ver. 2
Sounds awesome. One of the best mics for general recording, and doesn't clip out on louder sources like the Mikey version 1. Has a USB passthrough so you can sync/charge while connected. This product is highly recommended.
Studio Six Digital iAudioInterface The iAudioInterface is probably the highest quality doc connector solution for Apple devices. Works on any device that has the line inputs/outputs on the doc connector (iPhone 2G, 3G, 3GS, iPod 2nd, 3rd). Provides calibrated stereo inputs and outputs, as well as a calibrated microphone suitable for FFT analysis and tuning a studio space. Uses stereo 1/4" jacks so be prepared to hit the local radioshack for some adapters.
Belkin TuneTalk Works with MultiTrack for recording in stereo and provides a stereo line in as well. Seen pictured here with a stereo AIWA mic we had laying around the studio. It can handle some fairly large pressure levels. Actually too large. With the 'autogain' switch set to off, the signal level is very small when playing loud and close by on an acoustic guitar. This makes the internal mics practically useless for general studio work. It has the autogain function to compensate for the lack of volume, but autogain is never to be used for professional recording. Even though the input was way too low, it sounds good and has a full response. It does function well as a line input.
Alesis ProTrack As it is now, it can be used for recording, but to monitor the previously recorded tracks you must plug in headphones to the iPhone/iPod instead of the ProTrack. This is because the ProTrack doesn't support full duplex audio. What this means is, with the hardware input monitor right there on the ProTrack, which has zero latency, can only sit there idle during a recording. OR, you can use the hardware input monitor, but not hear the playback of the other tracks through the headphones. It's frustrating that Alesis decided to not support full duplex audio and maybe the next version of the ProTrack will have it.
The good news is that you can still use the headphone output on the iPhone for monitoring and the ProTrack for recording in stereo, with minimal latency imposed by MultiTrack. If you have an iPod touch, you'll need to get a dock extender so the headphone outputs can be accessed. We've had good luck with the one from http://www.buyijet.com/extenders/iexten ... black.html
Built-in microphone
The built-in microphone on iPhone 3G and 3GS, sounds surprisingly good and is always available in a pinch. The 3GS has pretty major bass cut though, so recording a bass isn't going to sound great.
Apple Headset
These come standard on the iPhone and iPod, and feature a mono microphone and stereo headphones. The mic is built into the push button switch and is very small, but it sounds fairly descent.
The iPad (1, 2, and 3) can use the Camera Connection Kit to connect USB devices. The iPad 4 should use the Lightning to USB Camera Adapter. Any USB audio device which is full-speed USB class-compliant should work, but if the device draws too much current a powered USB hub is required. We have tested the following devices:
Focusrite Scarlett 2i2 (Works with 2 inputs simultaneously)
Focusrite Scarlett 8i6 (Works with 6 inputs simultaneously)
Focusrite Scarlett 18i6 (Works with 8 inputs simultaneously)
Lexicon Omega (Works with 4 inputs simultaneously) Forum thread on this unit
Alesis iO Mix (4 inputs simultaneously) (not shipping yet)
Alesis iO Dock (2 inputs simultaneously)
Alesis iO4 Four-Channel interface (Works with 4 inputs simultaneously)
RME Babyface (8 Inputs simultaneously)
RME Fireface UCX (8 Inputs simultaneously) Forum thread on this unit
M-Audio Mobilepre (2 inputs simultaneously)
M-Audio Fast Track Pro (2 inputs simultaneously)
Blue Yeti (Stereo Microphone)
Griffin iMic USB Audio Interface (2 inputs simultaneously)
Art USB Dual Pre Project Series (2 inputs simultaneously)
Others have reported USB devices that work:
MXL USB Mic Mate Pro
C01U - USB Studio Condenser Microphone
Samson Zoom H4n
Samson Zoom H4
Allen & Heath ZED-10FX
Roland UA-1G USB Audio Interface
Roland UA-25 USB Audio Interface (requires powered USB hub)
Shure X2u XLR-USB Signal Adapter (requires powered USB hub)
Behringer UCA-222
USB Things tried that didn't work:
Tascam US-800 (8 inputs simultaneously, issues with iOS 6.0.1) Forum thread on this unit
M-Audio Fast Track Ultra
Akai EIE Pro
Mixvibes U-Mix 44
iPhone 4, iPod 4th Gen, iPad, and iPad 2:
Stereo interfaces and mics:
Sonoma GuitarJack 2
Tascam iM2
Fostex AR-4i (iPhone only)
Line 6 Mobile In
Mono only guitar interfaces:
Apogee JAM (not for iPod)
iRiffPort
iPod 3rd Gen, iPhone 3G, and earlier:
These products use the headset input port and will work with all Apple devices. The problem with the headset input is that it is mono only, and also suffers from a major bass rolloff (150Hz and below). There is also crosstalk from output to input, so when monitoring tracks the mic tends to pick up the signal as bleed into the recording.
iRig Mic Sounds a little thin for vocals, and crosstalk is a major issue (especially a high transient sound like a click track)
Amplitube iRig (Guitar) Can be used for recording guitar, but recommended to use a extra headphone amplifier to reduce crosstalk (It has a lot)
Peavey Ampkit Link (Guitar) Great for recording guitar. Has active circuitry to reduce crosstalk so it takes a couple AAA batteries.
kVconnection XLR microphone adapter cable This one is good for connecting a non-phantom powered mic which has an XLR plug. We tested this adapter with a Shure SM57 dynamic mic and a Audio Technica AT801 mic and it works, but with the same crosstalk problems and lowend cut that the headset input port exhibits. Cost is $23.50. Please see the companies web site for a variety of connectors.
Doc connector mics for 3G, 3GS, iPod 2nd and 3rd gen:
A much better alternative than the above headset port interfaces, is to use a Doc connector mic/interface. This connector has a stereo line input/output without any EQ or other nastyness. These are analog inputs/outputs. For these older models (3GS and earlier, iPod 3rd Gen and earlier) a number of them are available and the prices are quite cheap now:
Blue Mikey ver. 1 This mic sounds very good when recording low volume sources, and has great bass response.
Blue Mikey ver. 2
Sounds awesome. One of the best mics for general recording, and doesn't clip out on louder sources like the Mikey version 1. Has a USB passthrough so you can sync/charge while connected. This product is highly recommended.
Studio Six Digital iAudioInterface The iAudioInterface is probably the highest quality doc connector solution for Apple devices. Works on any device that has the line inputs/outputs on the doc connector (iPhone 2G, 3G, 3GS, iPod 2nd, 3rd). Provides calibrated stereo inputs and outputs, as well as a calibrated microphone suitable for FFT analysis and tuning a studio space. Uses stereo 1/4" jacks so be prepared to hit the local radioshack for some adapters.
Belkin TuneTalk Works with MultiTrack for recording in stereo and provides a stereo line in as well. Seen pictured here with a stereo AIWA mic we had laying around the studio. It can handle some fairly large pressure levels. Actually too large. With the 'autogain' switch set to off, the signal level is very small when playing loud and close by on an acoustic guitar. This makes the internal mics practically useless for general studio work. It has the autogain function to compensate for the lack of volume, but autogain is never to be used for professional recording. Even though the input was way too low, it sounds good and has a full response. It does function well as a line input.
Alesis ProTrack As it is now, it can be used for recording, but to monitor the previously recorded tracks you must plug in headphones to the iPhone/iPod instead of the ProTrack. This is because the ProTrack doesn't support full duplex audio. What this means is, with the hardware input monitor right there on the ProTrack, which has zero latency, can only sit there idle during a recording. OR, you can use the hardware input monitor, but not hear the playback of the other tracks through the headphones. It's frustrating that Alesis decided to not support full duplex audio and maybe the next version of the ProTrack will have it.
The good news is that you can still use the headphone output on the iPhone for monitoring and the ProTrack for recording in stereo, with minimal latency imposed by MultiTrack. If you have an iPod touch, you'll need to get a dock extender so the headphone outputs can be accessed. We've had good luck with the one from http://www.buyijet.com/extenders/iexten ... black.html
Built-in microphone
The built-in microphone on iPhone 3G and 3GS, sounds surprisingly good and is always available in a pinch. The 3GS has pretty major bass cut though, so recording a bass isn't going to sound great.
Apple Headset
These come standard on the iPhone and iPod, and feature a mono microphone and stereo headphones. The mic is built into the push button switch and is very small, but it sounds fairly descent.