MultiTrack DAW 3.4

New Features and requests for new features
User avatar
pwnified
Posts: 1565
Joined: August 17th, 9:41 pm

MultiTrack DAW 3.4

Post by pwnified »

The long awaited update is finally here :D
Apple has approved multitrack and is now in the state 'Processing for App Store', so it shouldn't be long before it reaches your device.

iTunes Store Link

Inter-App Audio - effects can be chained on each track, on the Bus return, and the Master out (*).
IAA Generators - on the Input to each track.
Audiobus 2.0 - Can be used as a sender for any track or master out. Supports saving and restoring state.
New graphics for iOS 7 - improved look is cleaner and less confusing.
Clean waveforms - rendered without blockies on retina displays.
64-bit support - with Neon optimizations and high resolution audio processing.
Dithering - applied automatically anywhere in the signal chain when bit width gets reduced.
Reduced filespace usage - up to 16 tracks before caches kick in on 64 bit devices.
Compressor - new dB reduction meter help you adjust threshold and ratio controls.
Completely rewritten audio engine - takes advantage of the best features of your hardware.
Supports up to 16 inputs simultaneously (USB hardware required).
Loop Points - changing loop points in realtime is now immediate.
Snapping - now you can snap to other regions, loop markers, and punch points, as well as Ruler lines.
Snap helpers - red vertical lines display exact snapping placement.
Song Menu - you can now drag song icons to reorder them.
IN Meter - now displays up to 8 input VU meters on iPad, or 4 on iPhone/iPod touch.

* IAA effects currently support only 1 instance at a time, system wide. In other words, you can't chain the same effect more than once.
IMG_0004 half.png
IMG_0004 half.png (214.06 KiB) Viewed 7747 times
Image
nwinkler
Posts: 6
Joined: August 12th, 10:56 pm

Re: MultiTrack DAW 3.4

Post by nwinkler »

Awesome, updating right now!
MoltenBlob
Posts: 14
Joined: March 15th, 4:06 pm

Re: MultiTrack DAW 3.4

Post by MoltenBlob »

Woah! this is cool.
Just did a virtual re-amp of my guitar from MTDaw through Bias and back in to MTDAW.
Fantanstic!
Thank you!!!

using AB1
alchemico
Posts: 2
Joined: March 28th, 8:45 am

Re: MultiTrack DAW 3.4

Post by alchemico »

hi,
I downloaded the update but I do not see options chosen for the IAA, no generator in inmput and there is no 'how to choose third-party effects.
thanks and congratulations for the software.
wherewithal
Posts: 37
Joined: May 24th, 8:58 am

Re: MultiTrack DAW 3.4

Post by wherewithal »

I think I'll be getting sick at work and heading home
fgplayerx
Posts: 16
Joined: May 22nd, 8:07 am

Re: MultiTrack DAW 3.4

Post by fgplayerx »

@pawnified

What does this mean exactly?

64-bit support - with Neon optimizations and high resolution audio processing.
alchemico
Posts: 2
Joined: March 28th, 8:45 am

Re: MultiTrack DAW 3.4

Post by alchemico »

I wrote more 'times but the moderator seems to ignore my request for help. . .
can you tell me where I find the options for IAA effects and generators?
Thank you.
anfirmor
Posts: 96
Joined: January 3rd, 7:32 am

Re: MultiTrack DAW 3.4

Post by anfirmor »

I don't appear to have any IAA tabs?

iPhone 5

What's up?
User avatar
pwnified
Posts: 1565
Joined: August 17th, 9:41 pm

Re: MultiTrack DAW 3.4

Post by pwnified »

Anorton wrote:Looks like an all-nighter. Thanks pwnified.
Try 10 all-nighters in the last month
anfirmor wrote:I don't appear to have any IAA tabs?
iPhone 5
What's up?
I'm really sorry about this, it looks like there is a bug already. IAA is not appearing on the iPhones. I'll have a point release as soon as humanly possible. Apple was pretty quick this time so it shouldn't be more than a couple days. If not I'll use my rush request to get it through.

iPads and iPods are working, the bug only affects iPhones.
Image
Post Reply