A nice little interface which packs a lot of features, including 8 inputs simultaneously on the iPad! Has USB 2.0 class compliant drivers and works flawlessly. Extremely high audio quality from RME.
Here's a video that features MultiTrack DAW at the 2012 NAMM show.
http://www.youtube.com/watch?v=YTNQAJu6 ... re=related
Product link:
http://www.rme-audio.de/en_products_fireface_ucx.php
RME Fireface UCX (16 Inputs simultaneously)
-
- Posts: 1565
- Joined: August 17th, 9:41 pm
RME Fireface UCX (16 Inputs simultaneously)
You do not have the required permissions to view the files attached to this post.
![Image](https://www.harmonicdog.com/images/signature.png)
-
- Posts: 27
- Joined: April 12th, 9:59 am
-
- Posts: 30
- Joined: February 3rd, 2:16 am
Re: RME Fireface UCX (16 Inputs simultaneously)
I saw a NAMM video (w. MT) a few days ago, which showed when they did a "class compliant" mode change to make it work for Ipad. I.e. they made it to also work for Ipad. However, I think I saw somewhere it would cost $1000 which is a bit too much unless the buyer also runs a studio.
The new small black Tascam IU2 interface (2 in + midi) looked nice though at $149 with included Idock-cable. Also works with computers. http://tascam.com/product/iu2/
Behringer also have a Alesis IO-dock clone. But what if the user prefers to turn the view 90 degrees? Might not cost too much maybe.
The new small black Tascam IU2 interface (2 in + midi) looked nice though at $149 with included Idock-cable. Also works with computers. http://tascam.com/product/iu2/
Behringer also have a Alesis IO-dock clone. But what if the user prefers to turn the view 90 degrees? Might not cost too much maybe.
-
- Posts: 5
- Joined: December 18th, 1:26 pm
Re: RME Fireface UCX (16 Inputs simultaneously)
This new sound card apparently has ADAT input, useful if like me youve got a 8 channel mic preamp. does anyone have any knowledge on whether inputs to the fireface thru ADAT will be seen by the iPad and MultiTrack?
Thanks
Thanks
-
- Posts: 1565
- Joined: August 17th, 9:41 pm
Re: RME Fireface UCX (16 Inputs simultaneously)
Unfortunately not, however I have heard that this will be possible with a firmware upgrade. You will be able to create templates which are mappings of various hardware inputs to the Class Compliant topology setup.
![Image](https://www.harmonicdog.com/images/signature.png)
-
- Posts: 2
- Joined: April 4th, 10:28 am
Re: RME Fireface UCX (16 Inputs simultaneously)
i have an ipad and
the RME fireface
as well as multitrackDAW
they work well and the mic pre's are quality
when MultitrackDAW can record 24 bit audio then i am totally there
the RME fireface
as well as multitrackDAW
they work well and the mic pre's are quality
when MultitrackDAW can record 24 bit audio then i am totally there
-
- Posts: 1
- Joined: February 24th, 5:40 am
Re: RME Fireface UCX (16 Inputs simultaneously)
Helle their!
But how do you connect your Firleface to the ipad??!
I am more than highly inerested!
Is that possible?
Thanks for reply
D
But how do you connect your Firleface to the ipad??!
I am more than highly inerested!
Is that possible?
Thanks for reply
D