Think the Behringer Xenyx 1002 mixer works?

How to use MultiTrack DAW
Rainville
Posts: 9
Joined: November 2nd, 10:40 am

Think the Behringer Xenyx 1002 mixer works?

Post by Rainville »

I was wondering if anyone had any experience with a mixer such as the Behringer Xenyx 1002 with Multitrack?

there is one for sale near that I am tempted to get for my Logic Pro setup but if it could plpug in and work on iPad (via usb camsra connector?) i would be very happy?
So what are thr chances it'll work? Here is a link:
http://www.behringer.com/EN/Products/1002.aspx
User avatar
pwnified
Posts: 1565
Joined: August 17th, 9:41 pm

Re: Think the Behringer Xenyx 1002 mixer works?

Post by pwnified »

On the whole I'd say that behringer is pretty cheesy, but more importantly, this is not a USB device so it won't work with iPad. I actually got the 802 and it works for driving a line input into the 3rd gen devices or earlier (3G, 3GS, etc). The preamps sounds ok, but I don't like the way the gain controls taper and the EQ leaves a lot to be desired. No power switch. And the power LED is blindingly bright (it's like they run 40ma through that little blue led or something)
Image
Rainville
Posts: 9
Joined: November 2nd, 10:40 am

Re: Think the Behringer Xenyx 1002 mixer works?

Post by Rainville »

Ok thanks for the tip. I ended up not buying the Behringer.
Thinking USB camera kit + Blue Yeti might do the trick for me..